2025-04-04 17:45:04
95.1k
10.1k
Filament Guide for ACE V2
@John_4944225
打赏
私信
关注
推荐打印方式
添加
Filament Roller Guide V2 for Anycubic ACE Pro
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 46m 46s
Qty 4 of the roller and its parts, added some support for the roller axle, printed in PETG
Kobra 2 Max
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 2h 13m 17s
2 sets, axle printed laying flat, no support
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 1h22m
更多
1.9k
分享
描述
This roller guide is maintaining filament feeding angle. When filament runs low, the feeding angle could be very sharp and that could increase the motor burden. With this roller guide, filament is fed with perfect angle all the time.
Updated 20-04-2025
After tested for some time, in previous design the roller bracket can detached from the main base when filament is pulled with force applied on it. So I have updated the design having the roller bracket inserted all the way from bottom, make sure there is no possibility it can detached. I have also move the roller about 1mm ahead, I think this is a better filament feed angle.
标签
版权声明
