Ironing Test - Mnemonic3D

Iron testing any filament type other than Carbon Fiber

Nozzle 0.4 & 0.6 in profiles

Just load and print 1st TEST file and find the best spacing you like. Load 2nd TEST file and change the spacing number to your chosen number from 1st TEST. Print and now you know what line spacing and speed you like for the surface quality.

If precision is needed don't change the flow rate as it changes dimensional height accuracy,

You can change it to 20% - 25% for clean ironing for both 0.4 and 0.6 nozzles, but remember your Z dimensional accuracy will change about 0.2 to 0.3mm in height.