KOBRA S1 BENCHY - PETG PROFILE SETTINGS

This print is intended as a test print, using a classic Benchy to showcase my personal PETG settings on the Anycubic Kobra S1. The goal is to demonstrate real-world print quality, surface finish, and overall performance using settings that I’ve dialed in through regular use—not a factory profile or a heavily tuned one-off.

These settings reflect what has worked reliably for me when printing PETG, balancing layer adhesion, detail, and consistency. As with any printer and filament combination, results may vary, but this Benchy provides a good reference point for how the Kobra S1 performs with PETG using my current setup.

This test print is meant for reference and comparison, and to help others get a starting point when tuning their own PETG profiles on the Kobra S1.