0
0
:
0
0
:
0
0
:
0
0
Anycubic 11 周年,记录属于你的 3D 打印时刻
Makeronline
2026-11-13 06:53:09
82
2
举报

KY003 Magnetic Hall Effect Sensor Case / Housing

@3Dimensional_3786585
私信
关注
描述

KY-003 Magnetic Hall Effect Sensor Case

 

 

This neat protective case features a secure clip-on lid, full access to the pins on the back, and the ability to screw-fix it in place. You can screw it in and slide it forwards or backwards to position it before adding the final fixing screw, or simply use 3M double-sided tape — they are so light that tape works perfectly (which is what I did).

 

Internal size is 21 mm × 17 mm, so it should be a little larger than most KY-003 modules. I had a couple of slightly different sizes, and this fits them with a bit of clearance.

 

I needed a holder to fix the sensor to the inside of my wardrobes so the lights would come on when I opened the doors. I used the KY-003 with a 5V relay and a few short strips of 5V LED lighting. I made this case specifically for that purpose, but it may be useful to someone else too. I also made a matching case for the 5V relay to keep everything neat — that one is (or will be) in my other models.

 

标签
ky003
ky-003
hall effect
sensor case
sensor
lights
magnetic sensor
KY sensor case
hall effect case
magnetic switch
housing
case
enclosure for KY
ky-003 mount
arduino
ky series
版权声明