Mega Charizard X Pokemon - NO ACE PRO

Glue is required for assembly!

About the model:

I have tested the model twice—once at full size and once scaled down to 80%.

Belly:

During the first test assembly, I noticed that part of the belly didn’t fit correctly with the body. Gently heating the piece with a lighter until it softens allows it to be adjusted. (This issue was fixed in the second test, but if you experience it when printing, you can try this method.)

Teeth, claws, and shoulders:

To make it easier to distinguish left from right during assembly, the number 1 indicates left or top, and 2 indicates right or bottom. Also, numerically adjacent claws/teeth/shoulders correspond to the left piece in each set.

Eyes:

Mega Charizard X’s eyes are not separated into different parts. The preview shows the colors I applied in my slicer. If you don’t like the default eye color, you can paint them yourself or print the eyes in white and hand-paint them afterward.

Belly and body:

The configuration includes an undivided version of the body and Belly 2. You can try printing them as a single piece if you prefer.

Wings:

I experimented several times with printing Mega Charizard X’s wings. The challenge is separating them into black and blue sections. Since I’m not experienced in modeling and my part-splitting skills are limited, the current result is the best I could achieve after many tries. I provide two printing options for the wings: divided into nine parts or five parts—choose whichever works best for you.