Mega Man 1 Keychain Pack! - Retro 8-bit NES Game

Mega Man 1 Keychain Pack!

Step back to where it all began with this Mega Man 1 inspired pixel art pack, celebrating one of the most iconic titles in classic NES gaming history. This collection brings together Mega Man and the original lineup of Robot Masters—including Cut Man, Guts Man, Ice Man, Bomb Man, Fire Man, and Elec Man—alongside recognizable enemies and elements from the game.

Each design is recreated in bold, chunky 8-bit pixel style, staying true to the look and feel of the original NES sprites while being optimized for 3D printing, keychains, display pieces, retro gaming décor, and collectible builds.

From Mega Man’s classic pose to the unique silhouettes of each Robot Master, every piece is designed for strong visual readability and nostalgic impact. The inclusion of enemies and supporting characters helps round out the pack, making it feel like a complete snapshot of the original game.

Perfect for retro gaming fans, NES collectors, Mega Man enthusiasts, pixel art lovers, and 3D printing hobbyists, this pack fits seamlessly alongside other nostalgic character series and retro-inspired releases.

Whether you're printing for keychains, desk setups, gaming rooms, or collectible displays, this pack delivers a full dose of classic 8-bit nostalgia.

As always, this project is driven by the community — your boosts, feedback, and ideas help bring these retro packs to life. 🚀

This pack has been all set up for super simple and easy printing with multiple AMS or AMS 2 Pro's or AMS HT's

If you only have an AMS or AMS lite, please grab the 4-colour print profile!

Membership🍄 "READY TO POWER UP? 🚀 with a membership for our retro video game keychain packs! No cheat codes needed—just pure pixel-perfect prints! 🔥 With this membership, you’re stepping back into a world where cheat codes were sacred, cartridges needed blowing, and every pixel mattered! ⚡💊Boost MeIf you enjoyed these keychains, please consider boosting to support the creator. Thank you and make sure to check out my other packs!

Most keychains take between 45 minutes to 1.5h to print!

Like this pack? Check out my other video game keychain packs here:

I have this set to use the 0.4mm nozzle with a .28mm layer height. This prints three layers of colour so the colours turn out nice and saturated and minimize waste. After the colour, there's one solid black layer, three layers of infill, and four final solid layers for the back for strength with the back pattern set to Hilbert Curve for a nice texture. There is a small hole in each model which is just large enough to fit a 1mm keychain jump ring. If you find it too small, you can modify the size of the “Keychain hole” object in BambuStudio to make it a little larger, or take a small drill bit and drill the final keychain to make it a little bigger!

I purchased my keychain set from Amazon if you'd like to get something similar!

All models have been flipped face down on the print bed so the surface texture from the PEI plate gives them a nice textured surface! All the different pieces of the models are there if you want to play around with it. There is one black ‘back’ piece in each keychain, which is perfectly aligned to the rest of the model. This causes some flickering in the viewport when moving around, but it disappears after slicing. If you modify the settings of that piece, it will affect the infill settings, so if you want to save a little filament, feel free to adjust it there!

I made some changes to the first layer and first layer infill speeds, reducing them both by about half. This increases the print time for the first layer, but increases the bed adhesion and print quality a bit. If you find that the first layer is printing too slow for your liking, feel free to reset them both back to default settings in the speed tab.

If you want some extra crisp pixels, you can try printing these with the 0.2mm nozzle, but I didn't think the increased print time was really worth the extra quality. It's definitely noticeable, but I didn't think the tradeoff was there. Feel free to experiment and try it yourself!

Want to remove the keychain hole? No problem! Each keychain has a “Keychain hole” object on each plate. Just select it, delete it, and re-slice!

Want to scale these up really large to make some wall art? Just delete the “Keychain hole” object, then scale the X and Y axis to fit your print bed. Keep the Z-Scale back to 3.08mm so you're not printing extra layers though!

If you notice any settings that could be changed or improved, please let me know! I'd love to make any adjustments necessary so they all print great! If there's any other packs or characters you want to see, leave a comment!

Check out My other Poke-monster style Packs here: