Nothing Box：打不开的机关盒 An inoperable fuse box

由于 pdf 视频播放不正常，拆开视频链接我放在这里

这，是一个机关盒——Nothing Box

关于五金，你需要：

• 12*3 磁铁 3 颗

需要 502 粘合

组装详见说明文件

预估解密时间：25---50min，有玩 puzzle 经验者可以更短一些

背景故事：太忙了，来不及写，后续会补上的

Due to the PDF video not playing properly, I opened the video link and put it here.

This is a puzzle box — Nothing Box.

For the hardware, you will need:

• 12*3 magnets, 3 pieces

502 adhesiveAssembly

instructions can be found in the instruction file.

Estimated time to solve: 25–50 minutes; those with puzzle experience may take a bit less.

Background story: Too busy to write it now, will add later.

盒顶可以黏上“Nothing Box”的铭牌

建议：对所有结构上油，否则可能因为打印精度较低卡住

务必清理所有毛刺（推荐使用尖嘴钳）

A 'Nothing Box' nameplate can be attached to the top of the box. Highly recommended: lubricate all structures, otherwise it may get stuck due to low printing accuracy.

Be sure to remove all burrs (using needle-nose pliers is recommended).

关于打开，请熟读并背诵以下口诀：

不许暴力！不许暴力！不许暴力！

（呵呵）

Regarding puzzles, please carefully read and memorize the following mantra: No violence! No violence! No violence! (Hehe)

内部结构一赏：