2025-07-13 19:23:09
2.1k
132
Oreo Lens Cap 58mm
@bigovereasy_4575819
打赏
私信
关注
推荐打印方式
添加
Oreo 0.2 mm layer, 2 walls, 7% infill
Kobra 3
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ 分盘:4
/ 1h 40m 50s
Canon 0.2 mm layer, 2 walls, 7% infill
Kobra 3
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ 分盘:4
/ 1h 40m 31s
Nikon 0.2 mm layer, 2 walls, 7% infill
Kobra 3
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ 分盘:4
/ 1h 40m 34s
更多
88
分享
描述
Lens cap with a mounting diameter of 58mm
The spring slot is tapered, so insert the spring first from one side, then stretch it from the other side so the spring edge fits into the slot, then press the center all the way down.
I also made a clip that attaches to a strap and holds the lens cap.
The ring acts as a lens emulator, but I’ll leave it as an optional par
you can attach two caps on opposite sides, making it a full Oreo cookie.
As a bonus, I added three versions with "Canon," "Sony," and "Nokon" inscriptions.
Personal use only ⚠ No commercial
👉 Check My Patreon 👈
标签
版权声明
