SKODA OCTAVIA IV – Behind-Screen Storage Tray with Ventilation

Make better use of the unused space behind the infotainment screen in your Škoda Octavia IV with this custom-designed storage tray.

Designed to fit behind the multimedia display, this practical accessory creates a convenient storage compartment for small everyday items while incorporating a ventilation system intended to promote airflow around the infotainment unit and help reduce heat buildup.

With its functional design and clean appearance, the tray integrates discreetly into the dashboard area while adding useful storage space.

Features

• Vehicle compatibility: Škoda Octavia IV
• Installation location: Behind the infotainment screen
• Width: 260 mm but you can adjust the scale to fit your 3D printer
• Integrated ventilation: Openings designed to promote airflow around the infotainment unit
• Practical storage: Suitable for sunglasses and other small everyday items
• Functional design: Makes use of otherwise unused dashboard space
• 3D-printable design: Can be manufactured on a suitable FDM 3D printer

Required Printing Material

Print this part using ABS or ASA only.

Because the tray is intended for installation inside a vehicle, behind the infotainment screen, it may be exposed to high temperatures when the car is parked in direct sunlight. ABS or ASA is required for better heat resistance and dimensional stability in this application.

• Recommended materials: ABS or ASA
• Not recommended: PLA or standard PETG, as these materials may deform under elevated temperatures inside a vehicle
• Suggested layer height: 0.20 mm
• Suggested wall count: 3–4 perimeters
• Suggested infill: 15–25%
• Printer recommendation: An enclosed 3D printer suitable for printing ABS or ASA

These settings are starting points and may need adjustment depending on your printer, filament and chosen part orientation. Follow the filament manufacturer's recommendations, including ventilation and other safety precautions when printing ABS or ASA.

Important Notes

• Check the available space and clearances behind your infotainment screen before installation.
• The ventilation openings are intended to promote airflow; actual cooling performance depends on the vehicle's configuration and installation conditions.
• This is an independent 3D-printed accessory. It is not an official Škoda product and is not affiliated with or endorsed by Škoda.
• Verify the fitment for your specific dashboard and infotainment configuration before printing.

Instalation Notes

Slide the tray in from the right side to the left, positioning it behind the infotainment screen until it is properly seated.

Enjoy a More Practical Dashboard

Add useful storage space to your Škoda Octavia IV with a custom 3D-printed tray designed to make use of the area behind the infotainment screen.

SHARE YOUR PRINT

If this replacement helped you, please consider leaving a Like and Download.

If you print the model, please share a Make/Print photo and your feedback.

Your photos can help other users determine whether this replacement is suitable for their own bed.

Happy printing!

Support me here:

Ko-fi - Adrian M

Thanks a ton — and happy printing!