2026-01-19 06:23:58
926
48
Shower Hair Holder by Bleo3
@FireShark_2301219
打赏
私信
关注
添加
0.2mm, PETG, Kobra S1, 1.5 Hours
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 1h30m
21
分享
描述
I complained to my other half about having hair always stuck to the shower wall, or clogging up the drain, so she asked me to find a 3D printed solution for the problem.
Thankfully, I found this file from Bleo3 on Thingiverse here, which I printed and it seems to be just what she asked for.
I didn't find anything on MakerOnline that did the same job, so decided to share it with this community.
I printed it in PETG, and it needs no supports, and takes only about 1.5 hours to print.
标签
版权声明
基于以下模型二次创作
https://www.thingiverse.com/thing:6029935
