0
0
:
0
0
:
0
0
:
0
0
Anycubic 11 周年,记录属于你的 3D 打印时刻
Makeronline
2026-11-11 08:31:14
144
5
举报

Simple Soldering Fume Extractor

@Jerqu_3865579
私信
关注
描述

I made a fume extractor... again.

Well, trust me, this one is better. It pushes the air out so others can breathe the fumes, not you. It requires no regular filter changes. It sucks more. It is better in every way.


It is basically an enclosure for a 120 mm fan and the electronics for it, which then connects to an 80 mm duct. I used a simple fan controller and 12 V power via a 5.5 mm barrel jack. The screws that come with your fan should work to attach it. Simple, right?


The external parts needed (affiliate links, no extra cost for you):

80 mm Duct: https://s.click.aliexpress.com/e/_c35jaCHZ

Fan controller: https://s.click.aliexpress.com/e/_c3K9uZDz

5.5 mm barrel jack: https://s.click.aliexpress.com/e/_c3Q8TYyn

Fan (if you have a 12 V fan, great): https://s.click.aliexpress.com/e/_c41VYcqF

12 V power supply: https://s.click.aliexpress.com/e/_c4BMkxzl

标签
soldering
fumeextractor
fume
solder
electronics
fan
120mm
版权声明