2026-03-16 16:39:55
937
50
Simple Vesa mount Monitor Stand
@Manethon_Sega_3814903
打赏
私信
关注
推荐打印方式
添加
VESA Monitor Mount and Stand 240x220
Kobra X
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Plus
/ 分盘:3
/ 11h51m
Mount and stand with base 280x220 - Printable on S1 Max or K3 Max
Anycubic Kobra S1 Max
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Plus
/ 分盘:3
/ 10h31m
11
分享
描述
A simple, stable VESA monitor stand that’s rotatable, extendable, and height adjustable. Tested stable with up to a 32" monitor.
Print info: easy print, ~320g total
Recommended: 0.28mm layer height, 3 walls, 20% infill
Parts included:
- Rotatable VESA mount: fits 75x75 and 100x100
- Telescopic stand: adjust to your preferred height
- Stable base: two sizes
- 270×220 mm
- 240×220 mm
Hardware needed
- 1× M6 screw (≥65mm) + nut
- Connect VESA mount to telescopic stand (use the printed washer + nut knob)
- 1× M5 screw (≥25mm) + nut
- Connect base to telescopic stand
- 7× M4 screws (≥14mm)
- 4× for monitor to VESA mount
- 3× to lock the telescopic height
Side note
Yes, I willingly spent an unreasonable amount of time, caffeine, and sanity making this. If it helps you, hit like. If it really helps you, coffee via Ko-fi is always appreciated. 😌☕
标签
版权声明
