2025-03-14 09:00:16
1.8k
202
Tape Dispenser
@murcielago_1945339
打赏
私信
关注
添加
tape
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ 分盘:1
/ 1h 14m 27s
48
分享
描述
A remix of jag's tape dispenser, with the finger groove made parametric and wider. In the photo above, the white tape dispenser uses the STL generated by my remix, and the beige is using the original script.
This particular STL is designed to fit 1" wide 3M micropore surgical tape.
I printed mine with PLA and 0.2mm layer height. The threads were a bit rough at first, but warming the nut with a heat gun for 20-30 seconds and putting it off and on a few times (so the warm threads would mush to fit) fixed that problem. You could accomplish the same putting the nut in a warm oven for a moment.
版权声明
