Wall Mounted Dragon Sconce - Fire Breather

Introducing the second design of the Wall Mounted Dragon Sconce, "Fire Breather"!

This is the a part of a mini collection of wall mounted dragon sculpts. The idea behind this version was to have a subtle gothic inspired night light sitting next to my desk while I work or behind a taven bar.

This design also requires some extra parts from Bambulab. I'll add the specific parts I used while testing this out below (feel free to recommend some alternative lighting solutions within the comments! Especially a way to get a flickering flame effect...)

• Project files added with both supports painted and Settings I worked with added in.
• I've included 2 keyholes on the back for easy mounting. Follow the two notches on the top of the print (circled in the photos) for marking where to place your screws.

Make sure to follow my page, TikTok, and Instagram (all under "UnchainedHobbies") for upcoming designs and please leave a comment and photo of your new prints!

Make sure to follow my Social Media Pages for upcoming designs and please leave a comment and photo of your new prints!

---

Components

Flame Filament: PETG Translucent Red or Orange

Screws: M2 4/6mm

ELECTRICAL COMPONENTS (Construction included in the picture gallery)

• All variations use the 200mm or 300mm Cob LED Strip Light

USB Power Only (No power control):

- SH 1.0 to PH 2.0 Power Adapter

- USB-A Power Cable with PH2.0 Connector

USB with Potentiometer (Knob):

- Potentiometer Board with SH1.0 Connector

- USB-A Power Cable with PH2.0 Connector

- Power Distribution Board - 4 Channels

-Jumper Cable with SH1.0 Connector

Battery Pack with Potentiometer (Knob): 

- Power Distribution Board - 4 Channels

-Jumper Cable with SH1.0 Connector

- Potentiometer Board with SH1.0 Connector

- AAA Battery Case with PH2.0 Connector