Zombie Rising from the Pumpkin - Spooky Halloween

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Zombie Rising from the Pumpkin

Something rotten has awakened inside the pumpkin…

This detailed Halloween decoration captures a terrifying zombie bursting from a shattered jack-o’-lantern. With its decayed face, exposed ribs, torn clothing, and both hands reaching for its next victim, the model creates a dramatic scene straight from a Halloween nightmare.

The cracked pumpkin, carved face, and dynamic undead pose make it a striking centerpiece for a spooky shelf, desk, party display, haunted house, or horror collection.

Model dimensions

• X: 110 mm
• Y: 159 mm
• Z: 98 mm

Printing information

• Designed for FDM printing
• The model requires supports
• Due to the complex shape and fine details, some supports should be removed carefully
• Extra care is required when removing supports from inside the pumpkin
• Flush cutters or small precision pliers are recommended for cutting and removing difficult supports without damaging the model

The jack-o’-lantern has cracked open—and what was buried inside is hungry!

   Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
•  
•  
• Recommendations:
• 
  
•  
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
•  
• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
•  
• Clean the plate thoroughly before printing.
• Make sure the filament is dry and free from dirt. This can damage the print or weaken the support