2024-05-23 10:02:49
6.1k
665
斜坡自走兔司机（ramp walker）No Hardware Needed
@mingGY_5877071
Donate
Message
Follow
Recommended printing method
Add
.2mm
Kobra S1
Kobra S1 Max
、
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 1h27m
218
Share
Description
基于 无明业火_BLAZERS《斜坡自走玩具（ramp walker）兔司机》二创
二创修改如下：
1，无需插梢五金；
2，将原本需要打印成三个的部件组合成一个，一体打印成型，无需组装；
3，脚底增加鞋纹，适当增加脚步摩擦。
注意：
拆除支撑时建议使用钳子和镊子,仔细清理腿部之间的残留支撑灯芯，如有必要，可用针拨出。
转动腿部，压实支撑面，保证腿部转动灵活无卡涩
斜坡玩具是需要玩具本身和坡度配合完成运动，玩家需要自行调整坡度角度，达到最佳效果；
斜坡玩具防滑很重要，为达到最佳效果，请尽量使用防滑贴纸和粗糙的斜坡。
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
