玄岳Z-001坦克（Mobile Tank）

玄岳 Z-001 为新一代模块化科幻中型主战坦克

隶属势力：星穹联合体 — 安全署

定位：第一代坦克实验测试车辆

• 采用标准三人乘员编制，车体尾部配置四具战术火箭助推装置，可短时爆发极限机动能力，适配战场快速穿插、战术突进与应急撤离，机动战术灵活性极强。
• 主战武器配备 125 毫米大口径制式主炮，具备优异穿甲与攻坚效能，可适配多型作战弹药，正面装甲对抗能力突出；同步搭载 12.7 毫米同轴重机枪，负责肃清前沿步兵集群及轻型机动目标。
• 炮塔火力配置层次分明，尾部集成两座四联装通用导弹发射架，可切换反坦克、防空、对地打击弹药，实现超视距精准打击；车顶搭载独立遥控无人炮塔，内置六管加特林速射武器，构建全方位近程防御体系，有效拦截低空单位、无人机及近身突击目标。
• 该车集强火力、高机动、全维度防御于一体，战术用途全面，可适配平原攻坚、山地突进、全域协防等多种作战环境，是陆上主力攻坚突击核心装甲装备。

（以上为虚构故事，仅供娱乐）

Xuan-Yue Z-001 is a new-generation modular sci-fi medium main battle tank.

Affiliation: Star Dome Union — Security Bureau

Role: First-generation experimental tank test vehicle

• It adopts a standard three-person crew configuration. Four tactical rocket boosters are mounted at the rear of the hull, delivering short-burst extreme mobility. Designed for rapid battlefield penetration, tactical assault and emergency extraction, it boasts outstanding tactical flexibility.
• Its primary armament is a 125mm standard large-caliber main gun with excellent armor-piercing and fortification-busting performance, compatible with multiple types of combat ammunition, featuring formidable frontal armor resistance. A 12.7mm coaxial heavy machine gun is fitted to eliminate forward infantry groups and light mobile targets.
• The turret features layered firepower layout. Two quadruple universal missile launchers are integrated at the turret rear, capable of switching between anti-tank, anti-air and surface-strike munitions for beyond-visual-range precision strikes. An independent remote-controlled unmanned turret is mounted on the roof, armed with a six-barrel Gatling rapid-fire weapon. It establishes an all-round close-in defense system to intercept low-altitude units, drones and close-assault targets.
• Combining heavy firepower, high mobility and omnidirectional defense, this vehicle has versatile tactical applications. It can operate in varied combat scenarios including plain assault, mountain breakthrough and full-domain joint defense, serving as a core armored asset for land-based main force assault operations.

(The above is fictional content for entertainment only.)

注意事项：

• 打印前一定一定一定要清理打印板，涂打印胶水（因为有很多细小的零件，板子不干净容易炒面）；
• 本模型小零件特别多，部分零件需要用胶水固定，说明书有标明，请按照说明书组装；
• 履带采用半一体化打印，无需五金，推荐和我使用一样的PLA耗材，避免公差大；

Notes:

• Be sure to thoroughly clean the build plate and apply print adhesive before printing. Numerous tiny parts are included; dirty build plates will lead to warping and layer separation.
• This model contains a large number of small components. Some parts require glue for assembly, as marked in the manual. Please follow the assembly instructions.
• The tracks are semi-integrated printed parts. No metal hardware is needed. PLA filament is recommended (same as what I use) to prevent tolerance errors.