180x120x130mm鸟巢（包含磁吸屋顶和非磁吸屋顶两个版本）

网上买那个鸟窝实在是太难洗了！干脆自己搞一个！

这是我给我家牡丹鹦鹉搞的房子，尺寸是130mm宽120mm高180mm长，

有3个洞，理论上大门牡丹/虎皮鹦鹉这类小鸟轻松通过，玄凤鹦鹉的话太胖的不行（我家的胖鸡玄风能进去，甚至可以从窗户挤出来~）

为了透气，地面直接是镂空的，建议冬天的时候可以铺个软的抓绒东西在上面，

• 屋顶是可开启的，【有2个型号可以选择，注意看盘上的标签写了的】：
• 磁吸的，需要8个6mm*2mm磁铁；
• 非磁吸的，啥都不用，卡榫固定
• 和笼子的固定方式有2种：
• 直接放笼子里的地面上；
• 利用4个锚杆挂钩挂在笼子顶部（锚杆挂钩的方向可以调整，如果笼子不好固定，甚至可以绳子直接套住挂钩也行~LOL）

希望你的小鸟也能用上~~~

Buying that birdhouse online was so hard to clean! Might as well make one myself!

This is the house I built for my budgie (peach-faced lovebird). The dimensions are 130mm wide × 120mm high × 180mm long.

There are three openings. In theory, small birds like budgies/cockatiels can pass through easily, but chunky ​Cockatiels​ might struggle (though my chubby Cockatiel can actually squeeze in and even wriggle out through the window~).

For ventilation, the floor is fully open mesh. I recommend adding a soft fleece liner during winter.

The roof is removable with ​two versions available​ (check the label on the package):

1. Magnetic version (requires 8 pieces of 6mm×2mm magnets)
2. Non-magnetic version (uses interlocking grooves only)

​Mounting options:

1. Place directly on the cage floor
2. Hang from the cage top using four anchor rod hooks (hooks are adjustable; if the cage is unstable, you can even loop rope around them—Haha).

Hope your feathered friend can enjoy it too!