Dungeon Meshi Dragon Feast, HueForge and AMS 4 Colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Steel GreyAt layer #13 (1.12mm) swap to Silver Smoke GreyAt layer #18 (1.52mm) swap to White for the rest.