2024-05-15 14:07:44
7.9k
1.1k
Bottle Adapter for Can 0,33l / 0,5l
@BamBamDesign_2075164
Donate
Message
Follow
Recommended printing method
Add
PLA/PLA+/PETG - 0.16mm layer height - i recommand PLA
Kobra 3 Max
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:6
/ 3h27m
315
Share
Description
Bottle Adapter for Can 0,33l / 0,5l
Here it is….. the printable adapter to convert your can into a bottle!
- Snag fit for 0,33l / 0,5l Cans
- Good tightness tested with PLA & PETG
- Little latch to remove from can (Holds very strong)
- Integrated Thread with is compatible with most Screw Caps (2mm pitch)
- Printable Screw Cap added
It could be a little bit hard to push it on the can but that is important to get a good tightness.
It's recommended to print in PLA+ or PETG do not use Silk it will break to easy.
Remove the little custom brim after printing!
Use Food-save Material
Have fun with the part 🍻 And don't forget to like and subscribe✔
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
