Cast Fireball Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 170x162.07mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.3

PLA+ Sunlu Red Transmission Distance: 6.1

PLA+ Sunlu Orange Transmission Distance: 5

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #13 (1.12mm) swap to Orange

At layer #16 (1.36mm) swap to Pure Yellow

At layer #18 (1.52mm) swap to White for the rest.