Chinese New Year Red Lantern
- All Printers
- Kobra S1 Max
- Kobra 3
- Kobra 2
- Kobra S1
- Kobra 4
- Kobra X
- Kobra 3 V2
- Kobra 3 Max
- Kobra 2 Max
- Kobra 2 Pro
- Kobra 2 Neo
- Kobra 2 Plus
No data
Slicer : Anycubic Slicer v1.4.1 (Win)
Printer : Anycubic Kobra 2 Pro (Firmware v3.1.2)
Filament profil : "Anycubic PLA @KOBRA2 PRO"
Print Settings profil : "NORMAL @KOBRA2 PRO 0.20mm" modified (Infill Density : 10%, Support : None, Brim : No)
Filament : PLA Red Velleman
In retrospect, I should probably have set the filling density to 100% so as not to risk seeing the filling pattern through transparency when used with a light source. And I probably need to modify the filament profile used to slightly reduce the flow rate for this filament.
Print 1 : cny-box-lantern-mini-DragonLid_part1of2.3mf ( ~ 233.1 kB ) ~ 1 h 03 minutes of estimated print time. Filament used : ~ 9.98m 29.50g
Print 2 : cny-box-lantern-mini-DragonLid_part2of2.3mf ( ~ 10.0 MB ) ~ 33 minutes of estimated print time. Filament used : ~ 4.11m 12.25g
- New Collection
Facebook
Pinterest
Twitter
Reddit
- Copy link
Chinese New Year red lanterns with sides that slide together without glue or fasteners.
The four sides contain lucky characters that you can mix and match as you wish.
There is a larger and a smaller size for the lantern. For the larger size there is on open version and a closed translucent version. If you don't plan on putting lights inside it looks really nice in matte PLA. If you plan on putting an LED light inside then it's probable better to print in regular PLA as it lets more light shine through.
The model cannot be found
The model may not have been published or does not exist
