0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-11-07 22:29:44
439
41
Report

Christmas Angels with the Star of Bethlehem

@drakeforge3d_5567152
Message
Follow
Description

Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

 

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

 

Two angels bow their heads over the Star of Bethlehem, each holding it a little differently. One cradles the five-pointed star upright in both hands, while the other draws it close to her heart. Broad, layered wings curve around their shoulders, and their robes fall in soft folds. One gown hangs in straight pleats, while the other sweeps to the side, as though caught by a winter breeze.

Place them on either side of a Nativity scene or together on a mantel framed with evergreen branches. In the soft glow of Christmas lights, the folds of their robes and the curves of their wings catch the light, leaving the stars at the center of the display. The two poses complement each other, and either angel can also stand on its own beside a favorite Christmas keepsake.

Print note. Designed for FDM 3D printing with supports.



   Guide

 

 

 

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

 

 

 


1. DRY THE FILAMENT

2. CHANGE THE NOZZLE TO A NEW ONE.

 

 

 

Recommendations Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

 

 

  • Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.
  •  
  •  
  • Recommendations:

  •  
  • 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
  •  
  • PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.
  •  
  • Clean the plate thoroughly before printing.
  • Make sure the filament is dry and free from dirt. This can damage the print or weaken the support


Tags
Christmas
Christmas Angels
Star of Bethlehem
Winter
Toy
Chibi
cute
Christmas angels
Bethlehem star
Christmas star
Angel figurines
Nativity decor
Nativity display
Christian Christmas
Silent Night
Holiday shelf decor
Christmas centerpiec
Winter figurines
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.