Clamping Filament Clip

This filament clip is printed in spiral vase mode. The filament can be double clamped. This, and the ridges on the underside, prevent it from untwisting, better as other clips can do this. The filament clip is adapted to the curvature of the filament. This is unique and ensures even better clamping.

You can click the filament into the slot in the middle (without having to thread the filament end), and then clamp it once or twice with one or two turns in the outer slots.

The filament clip can remain on the filament during printing. It is just as easy to remove the filament clip from the filament even if the filament is loaded to the printer.

Printing recommendation

• Ensure External Perimeter Extrusion Width is set to 0.6 mm
• Enable Vase Mode
• Set Solid Layers Bottom / Top to 0
• Configure Perimeter generator to Classic (important, not Arachne!)
• To print multiple Clips, disable Vase Mode now, set Seam Position to Random, and add multiple instances.

I recommend using PETG because PLA tends to deform over time, but my favorite is ASA.