2024-11-17 02:51:06
1.8k
100
Commodore 1541 Floppy Disk Drive Lever (Mitsumi Drive)
@slabbi_2198508
Donate
Message
Follow
Recommended printing method
Add
Standard setting - 0.2mm
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 11m 33s
32
Share
Description
This is a replacement for the Commodore 1541 Floppy Disk Drive Lever (Mitsumi Drive).
Best way to print it is on the front side with support. 15% infill is fine.
There are three STL files with diameters ranging from 4.3mm to 4.5mm, so you can choose what is best for the filament (and printer) you are using. 4.4mm usually should work fine. If it is still too large, you can also clamp a thin wire.
If you like this design, please don't forget to comment & rate. :)
If you would like to support me for free, there is a quick way: You can use the DONATE button to gift me some of your accumulated points as a small gesture.
Tags
License
