Compact Powerbank (light weight carry)
This is a Casing for 18650 battery with a board for active charging and discharging. (A Single battery power bank).
Bill of Materials:
- Charging board
https://aliexpress.com/item/1005006087510671.html
- Contact plates 12 x 12mm
https://aliexpress.com/item/1005004640030928.html
Specs:
- Input power 5 Volts DC (USB - C).
- Output Power 5 Volts DC 1 Amp (USB - A).
- Light weight for easy carry.
Uses:
- Perfect for outdoor use and quick camping.
- Can be used to power anything that requires 5 volts.
- Can charge you phone (on slow charge mode) turn off the phone for more effective charging.
- You can use it a single18650 battery charger.
Cautions:
- Do not use old or untrusted battaries.
- Make sure you connected the leads correctly (the lead with the spring is the negative ( - ) side).
- Soldering is required please ask assitance from someone with experience.
Before you print:
- print plate should be cleaned with soapy water or IPA.
- machine should be properly maintained and lubricated.
- machine should be pre calibrated, Auto bed level, and pressure advance.
- Filament Flow rate should calibrated.
- Filament temperature should be optimized.
- Support filament materials is recommended (as i do most of my prints using support material filament for clean layers and easier support removal)
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
