Creality K1 Max Top Cover Holder

Creality K1 Max Top Cover Holder

I designed this holder to keep the top cover of the Creality K1 Max safe and secure when not in use, especially while working with PLA, as I prefer to keep the top cover open. This holder ensures the cover doesn't get lost or damaged.

Note: You will need M3 6mm bolts. Do not use bolts longer than 6mm, as they will protrude through the other side.

Print Settings

• Printer: Any printer capable of printing the required dimensions
• Rafts: No
• Supports: Optional, depending on the model orientation
• Resolution: Standard (e.g., 0.2mm layer height)
• Infill: 20-30% (adjust based on desired strength)
• Material: PLA or another suitable filament

This top cover holder is a practical accessory for maintaining the longevity and safety of your Creality K1 Max's top cover, ensuring it remains undamaged and easily accessible.