0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-08-09 14:41:49
1.9k
113
Report

Daylight Globe

@kida_4955747
Message
Follow
Recommended printing method
Description

I am delighted to finally present the “Daylight Globe”, a model that literally "colours our world" for the Colour our world 2.0 challange". This is a globe spinning around its own axis every 24h driven by a Clock mechanism, and lit by a lamp utilizing a LED lamp representing the sun. Together, this setup allows for an approximate representation of where the sun is shining on earth at each moment. Multiple options are available depending on what you want to make; from just a spinning globe to the full setup including the LED lamp representing the sun. Please download and read the description before printing to fully understand the different options available and material needed.


Options

Full setup (You print all the pieces to assemble both the globe and the lamp.)

Own lamp setup (You provide your own source of light and only print the globe.)

Only spinning globe (ignore setting the time/month correctly and just let it spin)


Materials

Clock components (https://tinyurl.com/3vv2s7wm)

LED Lamp (https://tinyurl.com/ywf233ks)

5x50mm Stainless Steel Dowel Pin (https://tinyurl.com/ycxpbam2)

2x 605zz Ball Bearings 5x14x5mm (https://tinyurl.com/3p9f6ms2)

5 BT3x20 SHCS Self Tapping Screw (https://tinyurl.com/556je2v4)

Additionally, super glue is required as well as a file or sand paper.

It might be possible to make this build with a printed Dowel Pin, bearings and use glue instead of screws. I have not tried, but please report back how it worked out if you decide to try this.


Printing

Single Colour vs Multi Colour Print

Printing the parts are straight forward. However, when deciding to print the globe in single or multicolour, I would like to highlight that the multicolour globe is heavier and with the centre of gravity…not in the centre of the globe. Both these facts makes spinning the globe more work for the clock mechanism. It still works well for me, but over extended time I'm not sure. My suggestion is to spend some time and paint the globe with acrylics and save some printing time and plastics.

Assembly information and additional info is available in the attached pdf file.


Please enjoy!

Tags
globe
spinning globe
earth
clock
led lamp
educational
multicolour
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Documentation
PDF
Daylight Globe Instructions.pdf
2.12MB