0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-04-14 16:35:49
2.4k
220
Report

Doggie Door - For screen Doors

@Duane777_5615757
Message
Follow
Recommended printing method
Description

I designed this to replace an old bought dog door. The old one was too thick and stopped the screen door from opening all the way which was really annoying.

It's a long print and pretty custom but maybe it can help someone. The opening is 200x225 suitable for pugs and smaller dogs. I tried a few variations of the flap and the solid one seems to be the best, I have mesh ones but they take for ever to print in TPU and they started to break from the bending. I used 3 M3x6mmx4.2mm threaded inserts from the inside for the flap locking bar as I knew I'd need to change it a few times without removing the wholes thing.


The frames have been cut to fit on the plate and should be glued together using the joiner pieces. I used acetone to weld the ABS frames.


It assembles with 8 M3x25mm bolts and nuts. All the screw hole have covers/caps that press in. (they can be removed with a box cutter blade)


I would have take better photos but I didn't think I'd be sharing this design. Feel free to reach out to me if you have any questions.

Tags
Dog door
dog
License