Dragonfly Paint Splatter Hueforge

 The Model is 150x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ Sunlu Red Transmission Distance: 6.1

PLA+ Sunlu Pure Yellow Transmission Distance: 5

PLA+ Sunlu Green Transmission Distance: 10

PLA+ Sunlu White Transmission Distance: 5

This print uses 6 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #16 (1.36mm) swap to Red

At layer #20 (1.68mm) swap to Pure Yellow

At layer #21 (1.76mm) swap to Green

At layer #23 (1.92mm) swap to White for the rest.