Fun STEAM educational aid showing Earths orbit around the Sun and the Moons orbit around the Earth. All rotations are within 1% accuracy with the gear chain. You can choose between gears 1-4 for rotation and observe the variation in rotation/orbit speed. I recommend a little grease on each of the bolts/axels to allow the spin to occur easier. Be careful how tight you secure the nuts on the bolts as too tight can cause binding.
The stand includes an optional cavity for adding clay for additional weight. Print the cavity side by side with the stand and insert a pause to pack with clay and insert into the part. If you don’t want to do this just enable support on the stand and the void will be filled.
If you have any questions about assembly please let me know. I did include a picture of the cross section for reference.
Filament - Pla +
Infill - 15%
Nozzle Temp - 210C
Bed Temp - 60C
Support - None
Bed Adhesion - Brim on the planets/sun
Layer Height - 0.2mm
