Easter Egg Trio – Embossed, Partial Cut & Full Cut
Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets.
Variants:
Version 1 (solid, 1 mm embossed pattern) – raised surface pattern (~1 mm), no cutouts. Clean and classic look.
Version 2 (partially hollowed) – partially carved pattern allowing subtle light to pass through.
Version 3 (fully cut-through / hollow) – pattern goes through the entire wall, creating a lantern-like effect.
⚙️ Print Settings (General)
Printer: FDM
Material: PLA (recommended), PETG optional
Layer height:
0.16 mm (recommended for detail)
0.12 mm (high detail)
Walls (perimeters):
2–3 walls
Top/Bottom:
3–4 layers (for solid version)
Infill:
0–10% (mostly decorative model)
Supports:
✔ Optional for full cut version if bridging issues appear
Seam:
Back / aligned (to keep front clean)
Speed:
40–60 mm/s for best detail
Cooling:
100% fan after first layers (PLA)
Notes:
For Version 3 (full cut) → ensure good bridging performance
For Version 2 → slightly slower speed improves edge sharpness
Best visual result with white or pastel filament
Can be scaled (recommended ≥80% to keep details)
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
