Ghostface Middle Finger Figurine
Bring a bold Halloween vibe to your 3D-printing collection with this Ghostface-inspired streetwear figurine. The model features a masked character wearing a detailed oversized hoodie, relaxed baggy pants, gloves, and chunky white sneakers.
The dynamic standing pose, tilted head, raised hand gesture, flowing clothing folds, and contrasting black-and-white color scheme give the model a modern urban/Halloween collectible appearance. It works especially well as a desk decoration, gaming-room accessory, Halloween display piece, or collectible figurine.
The model is designed as a 3MF file for convenient slicing and multi-color 3D printing. The black clothing and white mask/shoes also make it suitable for either multi-color printing or separate filament/color assignments.
Recommended uses:
- 🎃 Halloween decoration
- 🖥️ Gaming/PC desk decoration
- 👻 Horror-themed display
- 🧸 Collectible figurine
- 🎁 Halloween gift
- 🖨️ Multi-color 3D printing
The 3MF package is optimized for easy preparation in modern slicers while maintaining the character's detailed clothing, mask, gloves, and sneaker geometry.
🖨️ Short Print Profile Description
Recommended profile: 0.16–0.20 mm layer height, 3 walls, 10–15% infill, PLA/PLA+ filament, moderate supports for the raised hand and overhanging areas. Use slower outer-wall speeds for cleaner clothing and mask details.
⚙️ Recommended Print Settings
- Layer Height: 0.16–0.20 mm
- First Layer: 0.20 mm
- Wall Line Count: 3
- Top/Bottom Layers: 4–5
- Infill: 10–15%
- Infill Pattern: Gyroid or Grid
- Print Speed: 50–70 mm/s
- Outer Wall Speed: 30–40 mm/s
- Supports: Recommended
- Support Overhang: 50–55°
- Support Density: 10–15%
- Support Interface: On
- Build Plate Adhesion: Skirt or Brim if needed
- Nozzle: 0.4 mm
- Nozzle Temperature: 200–215°C for PLA
- Bed Temperature: 55–60°C
- Cooling: 100% after the first few layers
- Filament: PLA / PLA+
- Seam: Place toward the back where possible
- Print Orientation: Upright, as provided
- Multi-Color: Recommended — black for clothing/body and white for mask/shoes
Tip: For the cleanest result, use a 0.16 mm layer height and enable a support interface around the more detailed overhangs. This will improve the mask, hood, raised hand, and clothing details.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
