Goku Kaioken HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Eryone Black Transmission Distance: 5

PLA Eryone Red Transmission Distance: 5

PLA Eryone Orange Transmission Distance: 5

PLA Eryone White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #13 (1.12mm) swap to Orange

At layer #18 (1.52mm) swap to White for the rest.