Haku from Spirited Away Bookmark

I give you my first bookmark print (be gentle). Happy printing!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 50.8x109.93mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 1.8mm

Filaments Used:

    PLA Gray Transmission Distance: 2

    PLA Black Transmission Distance: 0.3

    PLA Blue Transmission Distance: 3.5

    PLA White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

    Start with Gray

    At layer #9 (0.8mm) swap to Black

    At layer #14 (1.2mm) swap to Blue

    At layer #16 (1.36mm) swap to White for the rest.