Halloween Pumpkin 3D Lamp

A spooky and atmospheric Halloween pumpkin lamp, perfect for seasonal decorations, desk lights, or mood lighting!

💡 Model Overview & Hardware Requirements

This model features a classic Jack-o'-lantern design crafted specifically to house a slim circular LED module.

• LED Compatibility: Designed specifically for a circular LED puck with a 60 mm diameter and 8 mm height.
• Directly compatible with:
• Bambu Lab LED Lamp Kit 001
• Generic 6cm LED puck lights for 3D printing.
• Parts: Split into 2 main parts (Top/Body section and Bottom/Base section) for effortless assembly and wiring management.

🖨 Recommended Print Settings

Setting

Recommended Value

Notes

Supports

Enabled

Required for overhangs around the eye and mouth cutouts

Infill

20% – 25%

Grid or Gyroid recommended

Wall Loops / Perimeters

3 Minimum

Helps prevent light leakage through internal infill patterns

Layer Height

0.16 mm – 0.20 mm

standard print height for clean details

Material Choice

PLA / PETG

Orange or Warm Yellow (for pumpkin shell), Dark Brown/Green (for stem)

🛠 Assembly Instructions

1. Print the upper pumpkin shell and lower base plate using the recommended settings.
2. Remove all support structures carefully from the inner cavity and facial cutouts.
3. Insert the 60 mm x 8 mm LED puck into the dedicated slot in the bottom base piece.
4. Route the power cable through the rear cable cutout.
5. Join the top and bottom pieces together.

Happy Printing & Happy Halloween! 👻