Harley Davidson Hueforge - Eagle Logo

Donate

Message

Recommended printing method

Print Profile Files (1)

Raw Model Files (1)

Add

Designer

/ Plates:1

/ 4h22m

Description

Project: Harley Davidson Eagle.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 1.28mm

The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA Bambulab Basic Purple Transmission Distance: 1.6

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Yellow Transmission Distance: 4.5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #15 (1.28mm) swap to Jade White

At layer #16 (1.36mm) swap to Purple

At layer #17 (1.44mm) swap to Jade White

At layer #24 (2mm) swap to Black

At layer #25 (2.08mm) swap to Jade White

At layer #26 (2.16mm) swap to Red

At layer #28 (2.32mm) swap to Yellow

At layer #29 (2.4mm) swap to Jade White

At layer #30 (2.48mm) swap to Yellow

At layer #32 (2.64mm) swap to Jade White for the rest.