Hexa-Triangle Super Fidget

I made this Hexa-Triangle Super Fidget as a print-in-place toy that joins six super-fidget triangles into a hexagon shape. It twists and folds in your hands, and the six-triangle layout gives it a bigger, more involved feel than a single triangle. The part I like most is how eye-catching it looks in a bright color. I really recommend printing it in a strong, engaging color so the hexagon pattern really stands out.

Print settings:

• Infill: 2%-15%
• Infill Type: Gyroid
• Supports: NO
• Brim: NO
• Filament: PLA or PETG or ABS/ASA
• Listed profile: 1 plate in 1 hour 0 minutes 57 seconds, with standard settings for the best results

Tips:

• The catch is the first layer: if you are having problems, clean the print bed and check the first layer, because it is the most crucial layer in the print.
• The whole print is really just perimeters.

My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.

You may also like:

• Tri-Hexagon Super Fidget (Print-In-Place) https://www.makeronline.com/en/model/Tri-Hexagon%20Super%20Fidget%20(Print-In-Place)/167960.html
• Triangle Super Fidget https://www.makeronline.com/en/model/Triangle%20Super%20Fidget/167631.html
• (Super) Multi-Square Fidget https://www.makeronline.com/en/model/(Super)%20Multi-Square%20Fidget/161506.html
• Square Super-Fidget (Print-In-Place) https://www.makeronline.com/en/model/Square%20Super-Fidget%20(Print-In-Place)/158453.html
• Gyroscopic Fidget Ring (2 in 1 Fidget) https://www.makeronline.com/en/model/Gyroscopic%20Fidget%20Ring%20(2%20in%201%20Fidget)/185527.html