0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-10-08 00:04:45
808
21
Report

KUBIK Night Lamp

@LemonLab_4978912
Message
Follow
Recommended printing method
Description

This KUBIK night lamp was designed for light a bit a bedroom side table. It can be used also as an ambient light, it will depend of the intensity and the dimmer options.

It works with a regular LED PCB system light (50mm rounded LED PCB 5v, you can buy it with a dimmable system for less than 4€).

  • It has a central tower to avoid the PCB move inside the lamp.
  • I've glued the PCB to the base with a glue gun.
  • Tolerance between the base and the lamp is so accurate, so if you need to open the lamp, you'll need a bit of strenght to open it up (but its possible!).
  • It has to be printed with, at least the lamp part, transparent filament (I've used PLA but PETG will also work).
  • I've tried with a 100% infill (night pictures) and also with a rectilinear pattern infill (15%) and the effect was slightly different! (It makes a linear pattern by the sides)


Enjoy it! ❤️


Tags
Nightlamp
cube
night
lamp
LED
PCB
USB
HAPTIC
License