2026-04-10 19:52:34
4.3k
218
KX Z-axis stabilization bracket
@User_5991332
Donate
Message
Follow
Recommended printing method
Add
KX稳定架
Kobra 3
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:4
/ 34h36m
Slim Profile to avoid leveling issues
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 5h40m
97
Share
Description
KX z轴稳定支架
固定使用10颗M3.5*10自攻丝进行固定
模型公差预留0.2-0.4mm
底座脚垫推荐TPU 进行打印
模型墙层数、填充尽量高一些
两侧卡扣安装时会比较难安装，可以适当用吹风机加热变弯后安装，趁还没有变凉，用M3.5*10自攻丝进行固定，然后静静等待冷却即可
For securing the KX Z-axis stabilizer,
use 10 M3.5*10 self-tapping screws for fixation.
Allow a tolerance of 0.2–0.4 mm in the model design.
It’s recommended to use TPU for the base pads.
Also, try to increase the number of layers and fill density in the printed model.
Installing the clips on both sides can be difficult. You can use a hair dryer to heat them slightly and make them bend before installation. Once they’ve cooled down, secure them with M3.5*10 self-tapping screws, then simply wait for them to cool completely.
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
