Kobra S1 - Ace2Pro Riser

The spacer for the Ace2Pro is designed to elevate the device, ensuring better airflow and preventing direct contact with the 3D Printer.

I built the side supports with the Skadis pattern, so that everyone can add what other accessories they want.

Very easy to print. Use also some glue for assembly.

You can use the same screws with which the Ace Pro was locked to the black stand to create a fixture between Ace2Pro and the riser.

ATTENTION!!!

The holes have a diameter of 4 mm, and the pins have a diameter of 3.9 mm.

If you do not have your 3D printer calibrated, and the printing profile calibrated in relation to the type of filament, you may have deviations from the dimensions.

You may need to work with the XY Compensation function, or with 3D model scaling.

Update: I also added 2 rear endstops for ACE Pro

Drawer 1 for the riser you will find here : https://www.makeronline.com/en/model/Kobra%20S1%20-%20Drawer%20for%20ACE%20Pro%20Riser/159206.html

Drawer 2 : https://www.makeronline.com/en/model/Kobra%20S1%20-%20Drawer%20for%20ACE%20Pro%20Riser%20%E2%80%93%20Normal%20and%20Taller%20Version/263151.html?trackModuleType=10

Update April 23, 2025: a taller version you can download from here : https://www.makeronline.com/en/model/Kobra%20S1%20-%20ACE%20PRO%20Riser%20-%20taller%20version/176310.html

Update April 14, 2026 : The magenta part on the top of the riser has been updated to be used for AcePro and Ace2Pro.

Download the v03Part9-10-Ace2Pro.3mf from the link : https://www.makeronline.com/en/model/Kobra%20S1%20-%20ACE%20PRO%20Riser/159078.html?trackModuleType=10

Enjoying the model?

If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!

Your support helps me keep creating and sharing more awesome stuff.

Support me here: https://ko-fi.com/adrian_m2025

Thanks a ton — and happy printing!