Kobra S1 - Right side Ikea Skadis organizer

Anycubic Kobra S1 /S1 Combo - Right side Ikea Skadis organizer

Update 2 : In the third printing profile you will find the pegboard that free the USB port.

Update : I updated the part behind the 3D printer, so as not to block the rear plugs, needed for the ACE Pro.

See the second added profile.

This organizer use the 3 existing screws on the rear right side.

Remove the screws then place the organizer base over the holes and screw all 3 screws.

That design is modular, and you can add your own Skadis design.

I designed to cover the complete side of Kobra S1.

Atention:

If you 3d print only the back piece in the mirror, you can also put the whole assembly on the left side of the 3D printer.

All other parts are symmetrical and can be used on both sides.

Enjoying the model?

If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!

Your support helps me keep creating and sharing more awesome stuff.

Support me here: https://ko-fi.com/adrian_m2025

Thanks a ton — and happy printing!