2025-06-27 01:06:56
24.2k
2.3k
Kobra S1C Y-Splitter
@vrplanet_5357941
Donate
Message
Follow
Recommended printing method
Add
0.12mm layer, 2 walls, no support needed
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 36m
490
Share
Description
This is a tailored y-splitter that goes together with my ACE Pro Time Saver here. It ensures smooth feeding from ACE Pro and an external spool.
You will need three PC4-M10 fittings.
I printed with a PETG filament as in my 3mf profile. PLA will work as well.
Assembly Tip:
- After printing, make sure to clean up the inner holes with a sharp knife and test feed a filament.
- Gently insert PC4-M10 fittings and connect PTFE tubings.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
