UPDATED (details below). If your Kobra X has a back wall and you have no choice but to use the KX spool holders, bracing the "shoulders" against a stationary wall can be a good solution. This brute force design reduces spool shaking significantly and can potentially increase print quality for tall/intricate/thin objects. No drilling or tape needed, just install the bracer and let the entire printer lean against the back wall. As the distance may vary from user to user, extra wall spacers have been included in build plate 03. New users need only print build plate 01 for a complete kit. Existing users need only print build plate 02 for the update only. If you want to print something to shake the printer, build plate 05 has got you covered.
UPDATE DETAILS:
V2.1 Other than the wall-side spacers, plate 04 now has shoulder-side spacers with three sizes (25, 35 and 45mm) in case more room is needed for other spool holder accessories. Special thanks to BFGnom for the feedback.
V2 replaces the shoulder mounts with an updated set that ensures they are clear of any collisions with the extruder when printing models at maximum height (260mm). Existing users need only print build plate number 2. New users need only print build plate 1 for the whole kit.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.

