2024-05-31 09:26:26
3.7k
310
Light Bridge
@DonnieJones_801054
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
More profile
103
Share
Description
I looked all over the internet and all I saw were round lights so I decided to make a light bridge with an ellipse. It is 27"tall and 39"wide. The bridge is 1-1/2" square and uses 24 #4x1" screws. The on/off switch is 19mm round toggle switch and the power comes from a 12v 2a wall adapter. The choice of lights is up to you. I placed 2 in-line connectors underneath the "D" plate. This will make it easier to transport but not needed.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
