0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-06-09 05:44:44
5k
282
Report

Magtire Fidget

@kida_4955747
Message
Follow
Recommended printing method
Description

I am happy to present the Magtire Fidget.

This little thing is way more entertaining than it looks at first glance.

The Magtire Fidget is made from two small tire-shaped pieces that snap together and roll around each other in a smooth, controlled motion. It’s not a traditional spinner — it has this satisfying magnetic “orbit” feeling that makes you want to keep it moving.

As you roll it between your fingers, there’s a subtle pull and the alignment makes each rotation feel guided and intentional. The tire tread adds a nice bit of grip, and the whole thing has a mechanical, almost gear-like feel without actually being complicated.

It’s simple, tactile, and surprisingly addictive. It’s small enough to keep on your desk, toss in your pocket, or fidget with during a long call. Great for staying focused, thinking through ideas, or just keeping your hands busy.

 

If you enjoy prints that feel interactive rather than just decorative, this one delivers. It’s a quick project, but the end result feels polished and satisfying — the kind of print you’ll actually keep using instead of just admiring once.

Magnets are just so cool, and this fidget, utilizing 3 large neodymium magnets for each tire, creates some strong forces that are just fun to experiment and play around with when you are not just spinning.

 

Multiple versions are available:

3 designs for where the magnet is inserted during printing

1 design for TPU where magnets are added after printing

1 design without magnets

 

Of these, my clear favourite is the TPU tires, which generates a smother more quiet fidgeting experience. PLA tires comes in as close second just being a bit louder. The non-magnet version is held together with a printed “clip” which works, but is not in any way comparable to the magnet versions. 

I know it takes a lot to order parts for a quick print like this, but it really is worth it for this model. The ultimate number of tires to print is 4 in my opinion as you can use all 4 to play in different ways.

 

Magnets needed

For each tire you will need three 15x3mm magnets or a single 15x9mm magnet.

 

Printing and assembly

 

PLA versions

If using the print profile, this is an easy print. The print will pause when it is time to insert the 3 15x3mm magnets in each tire. If using the 15x3mm magnets, putting 3 magnets together will create a single piece with the diameter of 15mm and height of 9mm. Please make sure that you insert the magnets in the same direction for both tires, or they will not work together.

 

 

TPU version

For this version you need to print the tire in TPU and the “hubcaps” in PLA. Optimized settings are available in the print profile.

After printing you need to collect all the pieces (Figure 1A) and push one hubcap into the tire (Figure 1B) until it clicks into place (Figure 1C). Turn the tire over and add the block of magnets (Figure 1 D-E). Finally, push the last hubcap until it clicks sealing the magnets in (Figure 1F)

 

No Magnet version

Print the two tires and the clip using the available print profile. After printing, add some oil to the inside of the clip (Figure 2A). Attach the clip to the first tire followed by the second (Figure 2B-C). Make sure to orient the tires correctly so that the fishbone gears fit each other. At this point the clip might be too tight for it to be able to easily rotate. To solve this, carefully pull the wheels apart to widen the clip just enough for the tires to spin freely while still interconnected (Figure 2D).

 

Please Enjoy!

Tags
fidget
magnet
tire
wheels
spinning
toy
modular
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.