2026-09-26 12:07:14
641
37
Mask
@pozsar_4308928
Donate
Message
Follow
Recommended printing method
Add
0.2mm layer, 2 walls, 8% infill
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 5h22m
10
Share
Description
It is intended for decoration purposes only. With the usual size limit of most printers (~250mm) this model can't be printed in a wearable scale.
Printing:
Use my shared, pre-configured 3MF print files or do the following setup:
- 0.40mm nozzle
- 0.20mm standard profile
- 8% gyroid infill
- outer brim
- max acceleration: 1000mm/s^2
- support type: organic (auto)
- 40° angle limit
Commercial License:
You can subscribe for a commercial license membership on my Patreon.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
