2024-09-26 21:08:33
44.8k
7.2k
Mini airplane 4.0
@Frontx_1299322
Donate
Message
Follow
Recommended printing method
Add
Upsidedown, 80% infill, 3 wall loops
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 21m
Mini Letadlo on Kobra S1
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 18m
Scaled to 150% and with the same settings
Kobra 3 V2
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 41m
1k
Share
Description
the first layer must have a height of 0.119, for greater strength. other layers are set to 0.08mm. Bend the rear wings under approx. 45°. The large wings can also be bent.
Infill 80%
Throw the glider up, then it flies far, suitable for years of use even into the wind.
The wings must be printed on 3 layers, otherwise the plane does not fly well.
The Airplane is printed upside down, after printing the model must be turned and the wings bent in the right direction
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
