2024-12-07 01:56:09
3k
409
ORBIT -Desk Lamp Led
@Jonathan1987_346019
Donate
Message
Follow
Recommended printing method
Add
Anycubic next slicer project
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:4
/ 19h 17m 07s
130
Share
Description
Hello everyone, I present to you "Orbit": a fully 3D printed orbital lamp.
Instruction:
1-First of all, get yourself an LED strip like this one: even with a similar controller is fine:
https://www.amazon.it/dp/B00SWIQ8US?ref=ppx_yo2ov_dt_b_product_details&th=1
2- Subsequently, cut a piece from the controller as shown in the photo:
3- Now, after printing everything, cut the excess LED strip; the measurement is approximately 488 millimeters, at the point indicated in the image:
4- Now, watch the assembly video at the provided link; it will only take 3 and a half minutes to put everything together!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
