2026-04-23 23:18:49
1.7k
105
PTFE 快拆压板
@7897_2112716
Donate
Message
Follow
Recommended printing method
Add
PTFE PIPE PRESS COVER
Kobra X
/ Plates:1
/ 0m
24
Share
Description
4mm这么小的快插接头徒手按压手不疼么；
做个单独的工具，用的时候还要把他找出来；
干嘛不直接打印个压板装到打印机上呢？
什么时候需要退料，按住它，拔出PEFT管子就行了！！！
4mm — such a small quick-connect fitting. Doesn't pressing it by hand hurt?
Having to make a separate tool, and then you still need to find it every time you want to use it?
Why not just 3D print a press plate and install it directly on the printer?
Whenever you need to, just hold it down and pull out the PTFE tube. Done!!!
step1：download the model and print it；
step2：Install it on your 3D printer
step3：Whenever you need to, just hold it down and pull out the PTFE tube. Done!!!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
